Logging-on for the first time

  1. After powering up and connecting the controller to the LAN network, after about two minutes you will be able to find the IP address and connect to the web app.

    The IP address can be found by looking at the DHCP list on your server/router for the network name UWP-DLB-xxxx or by using an IP scanner software.

Note: no valid signed certificate will be available for this network name, as this is a HTTPS secure connection it will give a browser warning that must be dismissed to continue to the website.

Immagine che contiene testo, software, Pagina Web, Sito Web Descrizione generata automaticamente

  1. Click on “Advanced”, then “Continue to xx.xx.xx.xx”:

Once connected you should log into the web interface.

There are three accounts, each with different permissions.

  1. For setting up the UWP-DLB, log in as Assembler using the follow details:

Username:     admin

Password:     admin

Notes:

  • When you log in for the first time you will be requested to change your password from the default to a unique password.

  • If you ever factory reset the unit, this will revert to the factory default again.

  1. When the browser refreshes, it will show the Info page.

You can now use the various settings to configure your UWP-DLB.